The Importance of Electrical Installation Condition Reports for Landlords (EICR Remedial Works)

EICR Remedial Works;

Electrical Installation Condition Reports, or EICRs, are an indispensable asset for landlords in order to guarantee their properties remain secure for tenants. EICRs can detect potential hazards and issues in a property and help avoid major issues.

An EICR will identify any issues that require resolution (codes C1 or C2). Once these have been addressed, the report is classified as’satisfactory’.

EICR Remediation (EICR Remedial Works)

EICR Remedial Works;

Each property must undergo an EICR – a thorough test of its electrical installation. This will identify any hazards for tenants as well as those which can be improved with necessary changes.

Landlords must act upon this report if it comes back as unsatisfactory, otherwise they could face fines and legal action from the local authority. As such, they should hire a professional electrician to carry out any required remedial work within 28 days of receiving the report (or shorter if specified in the report) or within any shorter time frame specified within that document.

Remedial works should always be carried out by a qualified and registered electrician, with proof that they have done this work correctly. You should also show proof to your tenants and the local housing authority that the work has been completed as this will provide assurance that it has been carried out correctly.

If your EICR report came back with C1 and C2 codes, you must act quickly to address them as they can be highly serious and put everyone’s safety at risk. That is why scheduling an EICR with an electrician is recommended; they will give you the best advice on how to address these problems effectively.

A broken switch can be labelled as C2.

C3 codes may not be life threatening, but they still need to be handled by an experienced electrician. Additionally, C3 codes often accompany FI codes which need to be resolved promptly in order to prevent further issues with your electrical system.

Your EICR should yield a satisfactory result if only C3 codes were reported and the engineer has recommended that these be resolved to meet Health & Safety standards. You should also receive certification for this work, which could either be a minor works certificate or electrical installation certificate.

Keep a copy of your EICR to give to the inspector and tester conducting your next inspection and test, along with any other documentation proving compliance with regulations. This will demonstrate that you have carried out any remedial work as requested, made the property secure for tenants, and served as an excellent reference point during future inspections.

EICR Testing (EICR Remedial Works)

An Electrical Installation Condition Report (EICR) is a document that assesses the condition of your property’s electrics. This report will identify any damages, defects or other hazardous issues that need to be addressed.

It is essential to have your EICR tested regularly so that it remains in optimal working condition. A test will indicate if any repairs need to be made, which can save you money and prevent accidents from arising.

During testing, an electrician will check the safety of an electrical system and identify any potential risks. This includes checking insulation resistance and polarity. They’ll also review the continuity of circuitry.

Once testing is complete, an engineer will supply you with an EICR report. This document is coded according to the severity of issues identified and each observation given a recommendation code so that you can easily understand what work needs to be done.

If your EICR results in an unsatisfactory result, remedial works need to be carried out on the electrical installation. These should be completed by a qualified electrician and you should receive an EICR certificate as proof.

Once the EICR has been issued, you must finish any incomplete works within 28 days and send it on to your tenant and local authority as evidence that you have fulfilled all legal obligations.

Additionally, you should provide your tenant with a copy of the EICR and keep track of any repairs or maintenance performed. Doing this will enable them to apply for their electrical certificates with ease.

Once you receive your EICR report, it is wise to reach out to the electrician who conducted testing to discuss any necessary work. This could range from a straightforward change of socket to something more intricate such as rewiring an area of your installation.

Your electrician may be able to complete the repair work themselves, or they might need to hire an outside electrician for you. They’ll let you know the cost of this work depending on what needs doing and its complexity.

EICR Reports (EICR Remedial Works)

A professional electrical engineer can provide you with a full EICR report that details any damages, defects or deterioration present in your installation. They’ll also suggest remedial works to address any concerns.

In some cases, an inspection will indicate that emergency action is required immediately. For instance, if there is a C1 or C2 warning, then immediate action must be taken to resolve the problem before it worsens.

If you discover that some of your electrical appliances are unsafe or malfunctioning, it is a legal requirement to get the necessary repairs completed immediately. Doing this helps safeguard you and your tenants from any accidents or injuries that might result if an appliance were to break down and cause a fire, for instance.

The cost of an EICR is usually within the range of PS125 to PS300, though this will depend on factors like the size and type of property being inspected. Therefore, it’s wise to shop around before settling on a price.

Your EICR should be accompanied by a written report which should be sent to you, your landlord and tenants within 28 days after completion. This ensures that all recommendations made in your EICR are implemented and your electrical system meets current regulations.

Installing an EICR for your home can be pricey, but it is necessary to guarantee your electrical system remains healthy. This is particularly pertinent if you have recently undergone renovations or moved into a different property.

If there are any issues with your EICR, it’s essential that you contact an electrician right away so they can make necessary repairs. Your EICR report will inform them what needs to be done and they can then give you a fixed-price quotation for the work needed.

EICR Certification (EICR Remedial Works)

The EICR is a legally-binding document issued to landlords after an electrical inspection and test. It outlines the current condition of a property’s electrical installation as well as any work that needs to be done, all with the purpose of ensuring occupant safety.

A qualified electrician who has taken a course on periodic inspection and testing should produce the report, registered with either JIB or an accredited scheme provider such as NICEIC. To inspect and test the electrical installation, they must disconnect it from its mains power supply and adhere to IET’s Wiring Regulations.

This process typically takes a number of hours and includes electrical testing – both dead and live – as well as inspecting the wiring to confirm it meets current regulations. Furthermore, an electrician can identify which components need repair or replacement, providing them with a fixed price quote for these works.

Faulty electric installations can be hazardous for occupants and may result in fires or shocks. That is why an electrical inspection and testing process is a legal requirement for all landlords in the UK.

To guarantee compliance, send out a memo to your tenants informing them of an inspection and test taking place. This will enable them to plan how they will continue using the property during this time. The memo should include details such as when, how long it will take and which areas can be inspected.

An EICR report will determine whether your property meets the electrical safety standards set out in the Private Rented Sector (England) Regulations 2020. It also details which parts of your electrical system failed the test and provides a detailed explanation.

If your electrical installation doesn’t pass the EICR test, it will be marked as ‘unsatisfactory’ and you must immediately arrange remedial works. These should be carried out within 28 days unless another timeframe has been specified in the report.

Moreover, if you are renting out a property is a good idea to get a PAT testing certificate done as well, although it is not a legal requirement but help you with the insurance claims later if anything goes wrong.

Our Pricing

Check Out Our Other Services